Benz new E smart electric suction door

Installation process

Note: It’s for reference only with all the pictures in this manual, and the pictures are different from the actual product depending on the models. It’s slightly different for them, but it’s the same with the installation method basically

Preface

Thanks for purchasing our smart electric suction door,we believe it can bring you a comfortable ,safe and convenient driving experience. It will introduce you with the functions, installation methods and performance and so on for the special smart electric suction door form Benz Series. Please read this manual carefully before using this product. To ensure the normal use of this product, please follow the installation methods of this manual to avoid losses and damage caused by improper operation. It’s just owned by our company for the property rights for the smart electric suction doors and their accessories ,and get Legal protection from the Republic of China.

Product Function Introduction

1. Lightly close the door. When the door is locked to the first- level lock, It will start working for the motor of electric suction door and make quiet suction for the car door and lock it , the parts of the door lock will return to the original position automatically.
2. It’s gravity lock set from traditional door,and it need be closed completely with much strength.And it will cause loud noise,also will have high Kpa quickly in the air from the closed door ,then it will be uncomfortable for eardrum and body.After install the smart electric suction door,it can avoid the uncomfortable feeling effectively.Just close the door lightly,it will be closed automatically with convenience and comfort especially in the narrow space in the car.
3. Usually the set is only for high-end and luxurious car,it also can bring you luxurious,comfortable,convenient and safe driving experience for the smart suction door.

Usage Instruction

Automatic Suction:
1. Lightly close the door. When the door is locked to the first- level lock, It will start working for the motor of electric suction door and make quiet suction for the car door and lock it , the parts of the door lock will return to the original position automatically. Closing door by hand: When the door lock is closed manually, the closing function of the electric suction door will also work to make sure it is fully closed for it.


Product assembly , shipment and saving

Assembly environment :
It need keep tidy also it shouldn’t have strong vibration and disturbed electric magnet from the assembly place.It should have static protection from assembly table,employees also some of working places,and employees should wear anti electricity bracelet and gloves.

Shipping Notice:

It can be shipped by sea, by air for packed goods,during the process of shipping,it should take measure for not getting wet , strong sun shining , strong hit and vibration

Saving:

It need save at the environment temperature of 10c-30c,also the 80% humidity,also save in the warehouse without Acid, Alkali and other Corrosive gas. It’s 2 years for saving time,and it need open the box to check when it’s over 2 years,after checking it,then it can put market.

Product maintain and repair

1. Don’t install or repair your product by yourself.
2. It will cause danger if it’s installed or repaired by non-training worker of electrical equipment and accessories.
3. Please notice all cautions from the manual,and obey the operation strictly.
4. Don’t let the product touch liquid,or it will cause short circuit or damage. 5. Don’t put the product at strong sun or high temperature for a long time,or it will cause damage.
6. Please use it in the temperature.The temperature range:20-70 Celsius degree ,Saving temperature range:-40-80 Celsius degree.

Product Caution:

Notice Temperature:
When it’s cold,especially in very low temperature in winter,please notice it in car,to operate the product in normal temperature as soon as possible. Notice Humidity:
If it’s immersed in water,maybe it will affect the normal usage for the product,please take special notice when you wash the car.

Before install

1. Installation position on the car

Benz new E smart electric suction door

2. Accessories List

Benz new E smart electric suction door

3. Tools needed

Electric rubber tape
Plastic Pry
Boxer with various specification screwdriver
Slotted screwdriver and Trash Can

4. Installation Cautions:

1. Before Install, In order to be safe operation,it need remove the “-” side of battery.Before installation, in order to ensure the safety of the operation, it will cause the glass without rising and falling by removing the “-” side of the battery , and In some high-end cars, the electrical appliances on the car need to be activated after the battery is removed. The previously stored settings will disappear.The battery cannot be removed.Please check whether it’s complete for accessories kinds and numbers,and also it need be wrapped with cotton on the easy-damaging and easy-scratching part.
2. In order to make sure with safety and right use for the product,it need be installed by professional trainers,don’t remove the product privately causing the not necessary damage.
3. To check whether it’s normal use for them from car door buttons,glass lifting and down,the car key start, close door and lock door.
4. Before installation,the installer need take off all metal material or others hardness carried and put them outside the car,to avoid the scratch on car seats ,inner panel and car door during the removing process.
5. During installation, it need remove many accessories, and it should save well for those to make sure it can run smoothly for next process.
6. Making lines position according to the installation process, to avoid it will influence the car accessories during the process, and also need fix with wire harness to avoid loosing and vibration.
7. During connect with power,don’t pull out the connected plug,to avoid damaging the core parts of car or the car fuse causing others’ damage or abnormal issue.
8. Before remove and assembly for all accessories,please make sure it’s ok for nuts and buckles,if it’s damaged and it must be replaced,to avoid abnormal sound during the driving.
9. In narrow installation space,please take care not let screws drop into car,if it happens, it must take out,or it will have abnormal

Install steps:

A. Remove Steps for the main driving door panel

Benz new E smart electric suction door
1.Remove the fixed screws of the inner door under the handrail
2.Pry fixed buckle along the edge of the inner door panel by pry
Benz new E smart electric suction door
3.Remove the rubber cover of the fixed screws of the glass lifter on
both sides, it will lower the glass to a suitable position by pressing the
car the glass lift switch button(Note:Adjust it from the fixed screw hole of the window riser to the screw)
4 Pull out the wire harness of the central control switch ,and connect
plug, and remove the door panel
Benz new E smart electric suction door
5.Loosen out the fixed screws of the glass lifter by screwdriver
Note: The screw is loosened about 2-3 turns, no need to remove the whole one
6.Push the door glass up to the closed state, and use electrical tape
Stick the glass tightly to prevent the glass from falling and damage
Benz new E smart electric suction door
7.Remove the fixed screws around the waterproof and soundproof
board, and remove it.
8.Pull out the plug of lock central control signal wiring harness
from the original car
Benz new E smart electric suction door
9.Remove the 3 fixed screws of the original car lock
10.Remove fixed screws of the decorative cover of the key emergency
lock core by screwdriver,and loosen them out .
Benz new E smart electric suction door
11.Take out the key emergency lock
12.Remove the outer door handle and loosen the fixed screws of the
door handle bracket
Benz new E smart electric suction door
13.Take out the original car lock head and the outer door handle
bracket as a whole, and remove Inner door handle cable
14.Separate the original car lock from the outer door handle bracket
Benz new E smart electric suction door
15.Remove the level of key emergency lock
16.Remove the cable wire of outer door handle
Benz new E smart electric suction door
17.Assemble the electric lock head and the original outer door handle
bracket Note: You need to install the key emergency linkage rod together
during installation
18.Install back the inner door handle cable
Benz new E smart electric suction door
19.Mounting hole for shockproof rubber pad; opening operation: take
out and open Hole mold sticker, stick along the surrounding diamond
edge according to the upper left corner hole as the benchmark Tight,
open a hole at the center of the small round hole mark on the mold paper
20.Use a Ø23MM hole opener to open an electric suction motor here
with cable hole
Benz new E smart electric suction door
21.Pass the self-priming motor cable through this hole
22.Buckle the motor cable to the lock and Install the cable into the fixed
groove
Benz new E smart electric suction door
23.Install the assembled electric lock to the corresponding position of
the door, and lock it with Fixed screw
24.Tighten fixed screws of the handle bracket and install back the outer
door handle
Benz new E smart electric suction door
25.Install the key emergency lock core and tighten the fixed screws
26.Check the definition sequence of wire harness ground wire pin with
lock central control by original car, Brown Yellow is the door switch
signal-ground wire, as shown in the pic above,The brown-yellow ground wire is the first place on the right bottom; pay attention to things when installing.
Item: If it is found that the signal ground wire of the original vehicle is in
phase with the switch signal wire.Instead, please install the technician to adjust it to the correct position as shown above
Benz new E smart electric suction door
27.Install the anti-vibration pad of the fixed motor, the self-priming
motor is shown in the picture above.The direction is fixed in the installation groove of the shock pad; (note for the motor installation direction).
28.Make a wire opening by cutting rubber sleeve of the wire harness by
pliers , it passes through power signal wire by the cut position as pic
showed above.
Benz new E smart electric suction door
29.Install the buckle of electric suction cable to the corresponding
position of the lock, and smooth the power signal wiring harness and the
central control signal wiring harness of the original car, and connect with
accordant position of lock.
30.Install the sound insulation board in right place,put the yellow wire
taking electricity of T-shape wire harness from fuse box to pinch on the
red +12V of ECU from the original car,black wire pinches the brown
ground wire.
Note: It need be pinched tightly for the electricity pinch,and can be
measured whether it ’s 12 output by muti meter.
Benz new E smart electric suction door
31.Tightly connect with the positive and negative power take-in
connectors, straighten the wiring harness and fix up it by tape
Test the suction function of electric lock suction: Press the lock core to
the first -step lock by tool,it’s whether normal for suction function,and whether it ’s normal work to lock car by pressing remote key.
32.Install back to the level of lock car with central control
Benz new E smart electric suction door
33.Lock the fixed screws around the waterproof board with insulation sound
34.Tear off the sticky paper of fixed glass, push the movable guide rail to
the fixed position of the glass lifter, and lock the two tight fixed screw
Benz new E smart electric suction door
35.Plug in button plug of the inner door central control and install back
the inner door panel, lock the fixed screws of inner panel ,and it ’s
finished for the installation.

B. Removal steps of rear door panel

Benz new E smart electric suction door
1.Remove the two fixed screws of the inner door panel under the
handrail of the left rear door
2.Pry the each fixed buckle of door panel by pry board along the trim
with door panel
Benz new E smart electric suction door
3.Remove the rubber cover of the middle glass lifter fixing screw and
press the car The glass lift switch button will lower the glass to a suitable position
(Note:Adjust it from the fixing screw hole of the window riser to the screw)
4.To loosen the fixed screws on the glass lifter by screwdriver
Loosen the screws about 2-3 turns, without removing the whole
one.Push the glass up to the closed state, and stick the glass with
electrical tape Tighten the glass to prevent damage from falling.
Benz new E smart electric suction door
5.Remove the fixed screws around waterproof board with insulation
sound function , and take out the board.
6.Remove the outer handle and the original car lock
(Note: It’s the same steps for removing with outer handle and the
original car lock from left front door,please take reference)
Benz new E smart electric suction door
7.Disassemble the original car mechanical lock and door handle bracket,
Install the suction lock and the door handle bracket
(Note: It’s the same steps with Disassemble and installation from the front door)
8.Open 3 installation holes with vibrating rubber pad at the small
circle positioning point by Ø23MM hole opener.Opening hole operation: take out the sticker of opening hole, following with the left curve with matched position for it , the round hole of
stickers should be tight match on the round holes of panel,and make
hole on the stickers with small round mark.
Benz new E smart electric suction door
9.Install the assembled electric suction lock to the corresponding
position of the left back door and lock the fixed screws;
(Note: The same installation steps with the one from the left front door)
10.Install the anti-vibration pad of the fixed motor, the self-priming
motor is to fix up the installation groove of the pad as pic shown above
(Note: The electric suction motor is installed in the sound insulation
board, pay attention to its installation direction ).
Benz new E smart electric suction door
11.Put the yellow wire taking electricity of T-shape wire harness from
fuse box to pinch on the red +12V of ECU from the original car,black wire
pinches the brown ground wire.
Note: It need be pinched tightly for the electricity pinch,and can be
measured whether it ’s 12 output by muti meter.
12.Straighten the wiring harness and fixed it tightly with tie tape, test the
function of the electric suction lock: if it ’s pressed with the bolt to the
first level lock by tool, to check whether the electric suction function is
normal close,whether it ’s normal lock after pressing the remote control
key ; Tight lock with screws of insulation board and fix them up.
Benz new E smart electric suction door
13.Install back for the inner door panel and lock the two fixed screws,
and it ’s finished for the installation process.

Purchase link:https://www.hautopart.com/product/mercedes-benz-electric-suction-door/

Leave a Comment