Ford Focus 2019 electric tailgate lift install manual


The intelligent electric tailgate is suitable for high-end luxury cars. It has the functions of hand-in-one opening, intelligent anti-pinch, intelligent height adjustment, etc. The driver can control the tailgate with the car key tailgate button. It is easy to control and practical.

Electric tailgate functions

It can be controlled by:
1. remote car key
2. tailgate button
3. central control button

More functions and product detail click here:

Product Parts Display

Installation steps

1.Remove the trim with the step as shown.
2. Use a screwdriver to remove the
head ball and remove the left and
right poles
3. After removing the original car
head ball, install our head ball with
4. Install the electric tailgate
5. In the position shown below, drill
a φ20 hole with our driller, make
the pole wire passes through this hole
6. Remove the original lock ring,
install our electric lock ring
7. Install the front tailgate
button in cab.
8. Install the tailgate button
as shown.
9. Wiring diagram: Yellow line:
button wire; Red line, pole wire;
Green line, electric lock wire;
10. No need to connect CAN-L, CAN-H,
and unlock-H wire. The shape of wire
as shown.

Remarks: After installing the electric tailgate lift, you must manually close it once and then open it. Finally, the installation is complete.

Height adjustment: After the installation is completed, make the decoder connected to the power supply and the tail door needs to be matched: adjust the electric tail door to the highest position, press the tail door button for 5 seconds and release the button after a long beep sound, then the matching operation is completed (if the car battery runs out, the matching operation needs to be re-matched).

Note: the installation instructions may be slightly different from the actual operation. If there is any problem, please operate according to the actual situation or contact us.

Leave a Comment