Mazda CX-5 2012-2016 Installation Instruction

Precautions

1.All pictures in the manual are for reference only. Pictures and objects may differ, but the installation method is the same.
2.In order to facilitate your installation, please carefully read the product manual before installation; When installing, protect your car’s surface and avoid scratching.
3.Please check regularly if all accessories connected with the car are loose to ensure safety

Installation Steps

Refer to the parts list and accessroy drawings to check if the accessories are complete. After the product is installed, press the tailgate button for 3-5 seconds. You will hear a sound “DI——” and then loose your hand. Press the tailgate button again and close it. You will hear two sounds. Tail gate learning is finished.

1.Remove the original lower right
bracket and struts, install our lower
right bracket, engraved with “R”.
The arrow is facing upwards, the
ball head is facing the outside
of the car, and it is fixed with
the original car screws. (Note:
Someone needs to hold the door)
2.Remove the original lower left
bracket and struts, install our lower
left bracket, engraved with “L”.
The arrow is facing upwards, the
ball head is facing the outside of
the car, and it is fixed with the
original car screws.
3.Remove the trim panel.
4.Unplug the original car rubber plug, the Hall wire passes through this
reserved hole.
5.Hall line is routing to the control
box.
6.Find the power and ground wire
at the passenger seat.
7.Connecting the ground wire,
unplug the original car 20A fuse
on the right side of the ground wire
and plug it into our power plug
8.Remove the trim panel at the
main driver, then punches a hole to
install the front switch button.
9.Disassemble the trim panel at the
main driving belt B-pillar and find
the central control line.
10.Our yellow central control line
is connected to the blue line (the
fifth hole in the first row from right
to left).
11.Unplug this socket at the tailgate
lock and insert it into our three
way adapter socket.
12.Remove the original door lock,
then install our upper suction lock
and fix it with the original car
screws.
13.Plug in the upper suction socket,
as shown in the figure.
14.Remove the original car locks
and place 2 shims or 4 shims under
each lock ring hole.
15.According to the color of socket, insert the plugs into the control box.
16.Control box installation
position, fixed it with our screws,
meson and gasket.
17.Punch a hole on the trim panel.
Install our tailgate switch button
and restore the trim panel.

Note:After the installation is complete, you must set the tailgate learning. Make sure that the door can be opened and closed in place. (Raise the tailgate to ideal height. Then press the tailgate button for 3-5 seconds. You will hear a sound “DI——” and then loose your hand. Press the tailgate button again and close it. You will hear two sounds “DI DI”. Tail gate learing is finished.) If you do not hear two sounds, learning is unsuccessful and you need to re-learn. If you can not close the door, use your hand to push the door to close when you are learning

Setting Height

1.Raise the tailgate to the ideal height; 2.Press the tailgate switch for 3-5s; 3.When you hear a long sound “Di——”, loose your hand and press the tailgate switch again to close the door. 4.When you hear two sounds “Di Di”, Setting height is finished. Note: Do not close the door with your hands after setting the ideal height. Be sure to use our own tailgate switch.

Key Control Method

1. Press the original Key fobs three times to open and close the door.
2. Press the front switch button to open and close the door.

Fault Solution

Disclaimer

Due to improper installation and improper use, caused the relevant issues and losses, these not include within our company ‘s warranty. Thanks for your purchasing our products. Please read the manual carefully before use and collect it for later reference.

Purchase link:https://www.hautopart.com/product/mazda-cx-5-2012-2016-auto-power-liftgate/

Leave a Comment