Model 3&Y Steering Wheel Center Console Screen Installation Manual

Touch Switching Function:
4 fingers long press for 5 seconds to touch the original car big screen, change UI display mode.
5 fingers touch the long press 5 seconds switch to display the meter sub-mileage reset.
6 fingers touch long press 5 seconds switch to display remaining power percentage or switch range.
7 fingers touch the long press 5 seconds to switch language, English or Chinese.

Product link:https://www.hautopart.com/product/model-3-y-steering-wheel-center-console-screen/

Insatll guide

1.Remove the trim at the end
ofthe dashboard
2.Remove the dashboard
3.Remove the trim at the end
of the dashboard
4.Remove the dashboard
5.Count the number 26 seen in the
vedio and do the wiring there
6.Install super screen
7.Wiring through small
Steel plate
8.Tighten the small steel
plate with six screws
9.Remove four clip use a
tool
10.Remove front side dash knee lower pannel trim cover
11.Disconnect light plug and
speaker plug
12.Find the signal plug and
disconnect
13.Connect the wiring with a fish wire
14.Reconnect the signal wire to its original positio
15.Set the wire as nearly as you can see in the vedio
16.Install the right side trim panel to its original position
Connect the plug
18.Connect the light plug
and speaker plug
19.Recover the panel trim
cover
20.Recover the trim at the
end of the dashboard

Leave a Comment