NISSIAN X-TRAIL Installation manual


The intelligent electric tailgate is suitable for high-end luxury cars. It has the functions of hand-in-one opening, intelligent anti-pinch, intelligent height adjustment, etc. The driver can control tailgate with the car key tailgate button. It is easy to control and practical.

Electric tailgate function

Easy to open
The electric tailgate can be controlled by the tailgate switch and the vehicle key.

Intelligent anti-pinch
When the electric tailgate is opened or closed, obstacles are encountered, and the tailgate can stop running to protect the user.

Height adjustment
The height of the tailgate when opening can be adjusted and the user can set the open the height by the manual button according to the usage habit.

Configuration list

Purchase link:

Install guide

1 Remove the original car pole asindicated
2 Remove the original car bracket as indicated by the red arrow
3 Mount the bracket
Note: L is left and R
is right
4 Installed the Electric strut
5.Pull and open the trunk plate, unplug the tail lock cylinder of motor, connect the red line to the purple signal line, and the orange to the white signal line.
6.White wire connected to the purple signal line of the back cover handle
7 Left strut pole hall wire harness plug and motor harness connect to the main wire
8 The right motor harness is inserted into the main wire.
Hall plug is not used
9 The controller is fixed to the left side of the trunk
10 The positive and negative power wire, OBD lines, and instrumentation line switch wires are routed like the red arrow
11 The power wire, OBD line and Instrumentation switch line are pulled from the top of the tail cover to the driver’s seat along the red line.
12 Remove the Instrument decorated board as indicated by the arrow
13 Pull the plastic plate up as indicated by the arrow
16 Positive and negative poles are connected to the battery
17 The instrumentation switch is installed here
18 The tailgate switch is installed on the left side of the tailgate

Leave a Comment