RUSH electric tailgate lift install manual

Electric tailgate functions

Electric tailgate lift assisting system opens and closes your tailgate by simply pressing a button.

This smart aftermarket lift gate provides additional security and value to your vehicle.

Installation is designed for the do-it-yourself and comes with various brackets depending on your car.

Purchase link: https://www.hautopart.com/product/toyota-rush-or-aruz-aftermarket-power-liftgate/

Product list:

Install guide:

Remove the original left strut.
Remove the original right strut.
Remove the left upper ball of the original car
Remove the right upper ball of
the original car
Install our left upper bracket and fix it with our screws.
Install our right upper bracket
and fix it with our screws.
Remove the left lower bracket of the original car, install our bracket, and fix it with our screws.
Remove the right lower bracket of the original car, install our bracket, and fix it with our screws.
Left and right poles are installed
Take power in below of
the original driver.
connect with ground at the rear
of the car.
Connect the central control wire
with pink wire on the B-pillar.
Wiring diagram
Remove the original car electric suction lock, install our electric shock lock, fix it with screws.
Electric suction lock plug
Remove the original car lower lock ring, install our lower lock ring, and fix it with our screws.
fixed our motor
Connect related wire and fixing the controller
in the tailgate. After checking all the harness
connections, power on, and close the tailgate
once by hand to complete the system initialization. Check the button and car key function, make sure no
problem, then recover the panel.

Installation Precautions

1.All harness ports, control boxes, poles, etc. can not energized until they are installed.
2.Pay attention to the direction of power take-off, must be connected to 20A constant electric fuse.
3.When installing the wire, it must be operated with the engine off and the car key unplugged.
4.If there is a situation where the tailgate cannot be closed, remove the rubber plug in the lock head.

Remarks: After installing the electric tailgate lift, you must manually close it once and then open it. Finally, the installation is complete.

How to use the remote control: Press and hold the car key unlock button(or tailgate button 3 times) to open or close the trunk; Cab button: Press to open the tailgate and press it to close the tailgate.

Disclaimer: The problems and losses caused by improper installation and improper use are not covered by our company’s warranty.

Leave a Comment