VW Golf electric tailgate lift install manual
Features
The intelligent electric tailgate is suitable for high-end luxury cars. It has the functions of hand-in-one opening, intelligent anti-pinch, intelligent height adjustment, etc. The driver can control tailgate with the car key tailgate button. It is easy to control and practical.
Electric tailgate functions
Easy to open
The electric tailgate can be controlled by the tailgate switch and the vehicle key.
Intelligent anti-pinch
When the electric tailgate is opened or closed, obstacles are encountered, and the tailgate can stop running to protect the user.
Install steps

step as shown.

the screwdriver.

Install our new brackets


poles wire are threaded through
the rubber hole of the original car door.

square mark on both sides of the
door (see the figure below).

ring and install our lock ring.


completed, please confirm that
the ball head is stuck by the
clamping ring. Under normal
circumstances, pulling back the
strut cannot be pulled, and the
position of the clamping ring is
shown in the figure.
Remarks: After installing the electric tailgate lift, you must manually close it once and then open it. Finally, the installation is complete
Height adjustment:
After the installation is completed, make the decoder connected to the power supply and the tail door needs to be matched: adjust the electric tail door to the highest position, press the tail door button for 5 seconds and release the button after a long beep sound, then the matching operation is completed (if the car battery runs out, the matching operation needs to be re-matched).

Note: the installation instructions may be slightly different from the actual operation. If there is any problem, please operate according to the actual situation or contact us.
