Skip to content

Manual de instalación del portón trasero eléctrico Lexus NX200 o NX300

Purchase address:

https://www.hautopart.com/product/electric-tailgate-lift/

1 Lexus NX200 or NX300 appearance

Lexus NX200 power lift gate

2Remove the middle trim panel

Manual de instalación del portón trasero eléctrico Lexus NX200 o NX300

3 Remove the shackles on both sides of the tailgate

Manual de instalación del portón trasero eléctrico Lexus NX200 o NX300

4 Remove the left and right plaques

Manual de instalación del portón trasero eléctrico Lexus NX200 o NX300

5 Remove the handlebars on both sides

Lexus NX200 power lift gate

6 Remove the plaque

Lexus NX200 power lift gate

7 Use the tool to open the gas spring snap ring, the left and right are the same

Lexus NX200 power lift gate

8 Remove the original car bracket

Lexus NX200 power lift gate

9 Install our company with brackets, use screws

Lexus NX200 power lift gate

10 Install our electric pole (right side of “L” on the left side of “R”)

Lexus NX200 power lift gate

11 Take out the original car rubber plug

Lexus NX200 power lift gate

12 Put our pole line into the original hole, the same left and right

Lexus NX200 power lift gate

13 Strut line trend map, the same left and right

Lexus NX200 power lift gate

14 Pull out the original car lock plug and connect it with the harness provided by our company.

Lexus NX200 power lift gate

15 Pull out the original tailgate button plug and connect it with the harness provided by our company.

Lexus NX200 power lift gate

16 Remove the original car lock trim (note the buckle inside)

Lexus NX200 power lift gate

17 Remove the original car lock

Lexus NX200 power lift gate

18 Install the lower suction lock provided by our company.

Lexus NX200 power lift gate

19 Fix the lower suction motor

Lexus NX200 power lift gate

20 Power supply negative ground position

Lexus NX200 power lift gate

21Use the fascia board to open the main driving left side plaque

Lexus NX200 power lift gate

22 In the re-insurance box, find the common electric power above 20A.

Lexus NX200 power lift gate

23 Take out the original car OBD.

Lexus NX200 power lift gate

24 Opposite to our OBD

Lexus NX200 power lift gate

25 Remove the original reserved hole on the right side of the steering wheel and install the buttons provided by our company.

Lexus NX200 power lift gate

26 Take out the left lower side trim of the steering wheel

Lexus NX200 power lift gate

27 Find the black plug

Lexus NX200 power lift gate

28 Here you need to break the line, connect the A-pillar, our yellow line connects to the original car black line.

Lexus NX200 power lift gate

29 Wire harness trend diagram

Lexus NX200 power lift gate

30 the connection control box harness is inserted into the bellows

Lexus NX200 power lift gate

31 Connect the corresponding harness to the control box and fix the control box

Lexus NX200 power lift gate

32 Punch the tailgate trim handle box and install the tailgate button (the drill bit is 22mm), pay attention to avoid the iron plate on the tailgate.

Lexus NX200 power lift gate

33 Restore all the plaques, the installation is complete, manually close the tailgate reset once for system initialization

Manual de instalación del portón trasero eléctrico Lexus NX200 o NX300

Deja un comentario





Scroll To Top
WhatsApp Click here to whatsapp us