Skip to content

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

1: original car appearance.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

2: Remove the original tailgate horizontal strip decorative panel

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

3: Remove the two corner decorative panels in turn, and then remove the tailgate large decorative panels.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

4: After the removal effect

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

5: Remove the gas spring of the original car (the same left and right)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

6: Remove the bracket of the original car and replace the special bracket equipped with our company (the same left and right)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

7: Replace the ball studs of the original tailgate and assemble the special ball studs of our company.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

8: Installation Our company is equipped with electric struts, with the struts on one end of the motor connected to the body bracket, and the other end connected to the tailgate ball studs (the same on the left and right)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

9: Remove the rubber plug of the original car and pass through the through hole of the strut. The effect is shown below.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

10: Pull out the original tailgate lock harness and connect it with our wiring harness.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

11: Pull out the harness of the outer door of the tailgate and connect it with the harness of our company.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

12: Remove the small cover on the left side of the tail box to see the GND ground position.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

13: The ground wire in our power cord is connected to this screw and grounded with iron. (Please strictly follow the grounding recommended by our company, otherwise the key switch door is not normal before the key)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

14: Red: cable, orange: ground, yellow: power cord

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

15: The main wiring diagram is as follows

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

16: Dock all the jacks and fix the control box to the following position

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

17: Remove the original car lock trim and lock wrap (note the dark button on the inside of the car)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

18: The effect shown after removal is as follows

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

19: Assemble the special lower suction lock assembly equipped with our company

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

20: Place the cable drive position as shown in the figure below.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

21: Install the original tailgate lock trim

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

22: Use the utility knife to remove the interference part of the lock trim panel (digital position in the figure)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

23: The effect after repair is shown below

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

24: Install the lock trim panel

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

25: Cross the line to the front B-pillar of the vehicle body, and connect to the central control line. The central control signal line needs to be broken.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

26: Our company's line color is yellow, and the original car wiring harness is a two-color line yellow-purple, as shown below.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

27; Disassemble the decorative panel at the bottom left of the driver's seat, as shown below

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

28: Find the body power supply for the common 30A power supply, as shown below

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

29: Connect with the original car OBD

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

30: The front button installation position needs to be punched, and the hole is punched in the upper left corner of the decorative panel (the drill bit is 22mm)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

31: The effect is as shown in the figure below.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

32: Rear tail button installation position, punched in the left position of the tailgate as shown below (using 22mm drill bit)

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

33: The installation effect is as shown below

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

34: Restore all the decorative panels, the installation is complete, manually close the tailgate reset once, in order to initialize the system.

Comment ajouter un hayon électrique pour Mazda CX-5 / CX5

 

Laissez un commentaire





Scroll To Top
WhatsApp Click here to whatsapp us