Keleos electric tailgate lift install manual

By HansShoW | 01/09/2021 |

Features

The intelligent electric tailgate is suitable for high-end luxury cars. It has the functions of hand-in-one opening, intelligent anti-pinch, intelligent height adjustment, etc. The driver can control tailgate with the car key tailgate button. It is easy to control and practical.

Electric tailgate functions

Easy to open：
The electric tailgate can be controlled by the tailgate switch and the vehicle key.
Intelligent anti-pinch When the electric tailgate is opened or closed, obstacles are encountered, and the tailgate can stop running to protect the user.

Disclaimer: The problems and losses caused by improper installation and improper use are not covered by our company’s warranty

Install step

1. Original car appearance
2. Open the tailgate remove the
Trim in the red frame
3. The effect after step 2
4. Remove the two side trim
5. Remove handle trim
6. Remove the big trim
7. Remove the terminal of the
original tailgate lock
8. Dock the harness with our wire port
9. Remove the original handle wire, dock
The harness with our harness port.
10. Remove the air spring tailgate lift
11. Remove the original bracket
12. Install our new bracket
13. Install our electric tailgate lift
14. Pass the electric tailgate wire
through the hole
15.Remove the trim
16. Remove the lock ring
17. Install the new lock wing
18. Route the wire connected to the
control box follow the seal rubber to the roof
19.Pass the threading tool through the conduit
20. Wrap the wire of the control box
and the threading tool wire together
21. Pass the threading tool from the
other side and let the wire that needs
to be connected to the control box
pass through the straight tube.
22. Disassemble the decorative panel on the
left side of the tailgate, and connect the
screws in the negative pole to the figure
23.Diagram of wiring
24. Hide the harness under the trim
25. Disassemble the cab lower trim
26. Find constant 30A electric
fuses in the fuse box and plug
the power supply.
27. Docking OBD interface
28. Remove the original car
reservation button and install
our front button
29. Make a hole in the tailgate
position as shown
30. Recover all trim, manually
open and close the tailgate once.

Remarks: After installing the electric tailgate lift, you must manually close it once and then open it. Finally, the installation is complete. How to use the remote control: Press the key unlock button 3 times within 4s to open or close the tailgate; Cab button: Press to open the tailgate and press it to close the tailgate.

Disclaimer: The problems and losses caused by improper installation and improper use are not covered by our company’s warranty.

Posted in Car tailgate & power running board news

Leave a Comment