Skip to content

Power tailgate install manual for Mazda CX-3

Click here to contact us to buy Mazda CX-3 Power tailgate
Power tailgate install manual for Mazda CX-3

1. Remove the original tailgate trim panel and prepare to install the electric tailgate.

Power tailgate install manual for Mazda CX-3

2. Remove the left lower bracket of the original car, install the lower left bracket of our company, and install the bracket of our company with the original car screws.

Power tailgate install manual for Mazda CX-3

3. Remove the right lower bracket of the original car, install the lower right bracket of our company, and install the bracket with the original car screws.

Power tailgate install manual for Mazda CX-3

4. Remove the original car bracket and install the upper bracket of our company (the upper brackets are exactly the same, regardless of the left and right)

Power tailgate install manual for Mazda CX-3

5. The upper bracket is installed, then install the poles provided by our company, pay attention to the orientation of the ball head and the direction of the Hall line.

Power tailgate install manual for Mazda CX-3

6. Install the poles and let the strut Hall line penetrate from the reserved hole of the original car.

Power tailgate install manual for Mazda CX-3

7. The Hall line on the left is pierced from the reserved hole of the original car.

Power tailgate install manual for Mazda CX-3

8. Strut Hall line routing diagram

Power tailgate install manual for Mazda CX-3

9. Stroke installation completed schematic

Power tailgate install manual for Mazda CX-3

10. In the main driving position, on the left side of the foot, find the cover in the picture, open it and you will see the fuse box.

Power tailgate install manual for Mazda CX-3

11. At the fuse box, insert our power cord as shown

Power tailgate install manual for Mazda CX-3

12. Near the power supply, as shown in the figure

Power tailgate install manual for Mazda CX-3

13. Grounding as shown

Power tailgate install manual for Mazda CX-3

15. Locate the left rear door harness connector. The gray line in the picture is connected to our yellow line.

Power tailgate install manual for Mazda CX-3

16. It is recommended to install the front button in this position, you need to punch with the hole opener

Power tailgate install manual for Mazda CX-3

17. Remove the original car lock and install our lock

Power tailgate install manual for Mazda CX-3

18. It is recommended to place the electric lock next to the tire.

Power tailgate install manual for Mazda CX-3

19. Power line wiring diagram, (side)

Power tailgate install manual for Mazda CX-3

20. Red is the schematic diagram of the power line wiring, yellow is the schematic diagram of the electric suction lock power line

Power tailgate install manual for Mazda CX-3

21. Unplug the original rear door and plug in the three-way plug of our company.

Power tailgate install manual for Mazda CX-3

22. Find the original taillight switch trigger line, connect our purple line (the original tailgate trigger line is a negative trigger, the multimeter is up to the positive power, the original tailgate button will become zero volts

Power tailgate install manual for Mazda CX-3

23. It is recommended to install the button behind the tailgate here.

Power tailgate install manual for Mazda CX-3

24. Install the controller in the position of the tailgate, insert all the plugs, restore the trim, and finish the installation.

Power tailgate install manual for Mazda CX-3

 

 

Leave a Comment





Scroll To Top
WhatsApp Click here to whatsapp us