Ultra-thin 2.5D Screen
Instrument frame only about 3mm; extremely narrow frame appearance display with thin seamless bezel, perfectly into your the dashboard for OEM look; 2.5D screen fits perfectly on the original car dashboard
CarPlay & Android Auto
- Support Apple Wireless CarPlay And Wired/Wireless Android Auto
- Support Smart Phone Screen Projection
- Support Bluetooth, Wi-Fi connection
- Support Voice Assistant, such as Siri/Google etc.
The hardware of 9.0-inch screen with a powerful CPU with 2GB RAM and 32GB ROM, offers you a faster and smoother experience. It support multiple control method: touch screen, mobile phone, steering wheel, and voice control
Common Troubleshooting Guide
- The power supply fuse is burnt out
- Microprocessor abnormal operation caused by other factors
- After unplugged the host connector, it is not plugged in within 5 minutes
- The host or screen plug is not plugged tightly
- Replace the fuse of the same model
- Restart the key fob
- Connect all the wire harnesses, lock the car for 2 hours, keep the mobile phone and remote key more than 20 meters away from the car, and check whether the screen can be setup after 2 hours
- Reconnect the host plug
- Screen data error
- Press the RST reset button on the right side of the screen to restart the system
- Navigation software is uninstalled or deleted
- Re install the navigation software
- WIFI is not connected or there is no 4G network
- Connect WIFI to synchronize online map or check whether there is 4G signal
- GPS antenna position interferes
- Relocate the position
- The protocol wire of the power wire is not connected
- Reconnect the wire and check the wire interface
- Carplay did not connect in the correct way or the screen software version is outdated
- Reconnect Bluetooth or upgrade APP; Contact aftersale service or download the upgrade software from the website
- The system signal is not synchronized
- Unplug the power cable and reconnect
- Signal jamming
- 1. Set the default call path to the original vehicle Bluetooth or external speakers.
- 2. When using carplay, if you want to route calls through the car or speakers by default, you need to go to iPhone Settings>Accessibility>Touch>Call Audio Routing>Set as Bluetooth headset, and then default to any Bluetooth device. In this case, Tesla is selected.
- Incorrect setting
- Check whether auto is selected in the setting instead of speaker
Very good product
Easy installation plug and play, fits perfectly without drilling and produces high quality . To recommend
So great to finally have Apples’s car play now. Very well made looks like a OEM quality product.
Model 3, Y Center Console Dashboard Touch Screen (Linux 9.0'')
Very simple to install, I was looking for a device which allows me to have Apple CarPlay on my Tesla and it fits perfectly!!
I should’ve bought it sooner
Just what you need for your car it’s amazing
Great product, wish it had more integration
The installation is easy and the product feels OEM. Quality is great, controlling it is easy. The true highlight is apple CarPlay integration. However, the stock UI that mirrors speed limit and certain signals that come built in with the unit are really boring, and I wish it had more integration with the car. Is it possible for the blind spot camera to show up on the display like it does on the main screen when changing lanes? The stock Tesla image on the basic home screen is also extremely low quality. The screen could use some updated themes, images, and features. For now Apple CarPlay is how I use the screen, but I would like to be able to use the built in UI as well.
Perfect experience of Carplay and dashboard monitor on Tesla.
Apple car play and more!!! Easy and quick install.
If your looking to use any of those apps you love this is the best and easiest way to add Apple car play! If you wanting a screen in front of your steering wheel or Yoke, this is the one! It’s able to do everything you want and need. Look no further. Only takes about 30 minutes to install. Use my code at checkout: YS3XY1
Happy that I got it
Awesome experience, just the one I was looking for. It’s responsive with all the right info where I would like it.
I needed this!!!
Going from a traditional car with a speedometer to the Tesla model Y it was hard to get used to not having a speedometer. This unit took me about an hour to install it and looks like a factory unit compared to the center screen. It still allows plenty of air to travel toward the driver seat with it installed. The clean look of the night speedometer is my favorite. I recommend this to anyone that can’t get used to not having the traditional speedometer.
10/10 discount code Btsla97 for 25% off
perfect integration with the car, the top
perfect integration with the car, the top
device install without worry.tuto on youtube. impossible to pair my p30 pro in bluetooth. I therefore use a cable. bright screen. no bug. we will see in time.
Makes the transition to a Tesla 100x easier
While it was a little time intensive to install, it’s at no fault of Hansshow; Tesla’s placement of the computer plug-ins is not in an optimal place. The integration of the Heads-Up Display is seamless, quite literally plug and play. I’m able to choose to see my miles left on the Hansshow and percentage left on the Tesla screen. One thing I immediately hated about my Tesla was the lack of smart phone integration, but Hansshow solved that problem by giving back the ability to have CarPlay. I’m beyond pleased and would recommend this product to any Model 3 and Model Y owner. Looks OEM.
Hansshow display on UK Tesla Model 3
I have now fitted my display to my Tesla Model 3. Unfortunately, the instructions supplied are poor, but there are good videos on how to fit the display in a US Model 3. But, and this is a big BUT, the CPU in the car still faces the same direction and the connectors are up against the centre of the car. To fit this display, you need to take out the glovebox and the trim covering the inside of the passenger area and against the centre of the car. Even then, fitting the Y cable is still very hard. However, once fitted and working, there is a slight degradation in airflow from the vents, but the display is superb as are the added features and ability to always see the odometer and use car play. I set my display in permanent night mode. I would have given the unit 5/5 were it not for the difficulty in fitting it. This is not an average DIY job, be warned. I recommend, but with fitting reservations.
Product works well. The new hd is much clearer. Easy to install. Everything’s great!
Easy to install and looks great 5*****
Really nice screen. High definition ,very slim shape. It takes me about 30 mins to finish the installation. Before installation, i read some tutorial videos on Youtube just want to make sure every step is clear to me.
Great display and should’ve come from the factory like this or at least the option to install apps!
Very easy installation besides connecting the one adapter in the passenger foot well(Intel). I tried a few different ways from being upside down and trying to grab it with my left and right, using two iPhone spudgers, the only way that worked was for me to move the passenger seat all the way back, sit in front of the seat, reach blindly with my left hand, push the tab, and pull hard to get it out. After that it was very smooth. I wrapped my connections under the dash in electric tape to make sure they aren’t making any noise. I’ve been using it for over two weeks now and love it, I have Waze and all my information right in front of me. Everything from the Apple car play, sound to the instrument panel are perfectly synced. My only complaint is the speedometer for mph looks a little lazy/sloppy since the max speed says 260. Looks good for kmh but looks ****** when in mph mode. I also thought the default brightness for day and night was too bright, but not a problem anymore after figuring out how to switch the brightness to manual and setting it to my liking. You can also turn the brightness all the way down which will shut off the display completely to if you don’t want it on or want to save power, not that it uses much anyway, you might save 1-5 miles turning it off. I’ve did a few trips and haven’t noticed a difference in range. Was also charging cells phones too and the battery telling me how many miles I had left was still spot on. I noticed a lot of people complain and say it blocks the vents. It doesn’t block the vents at all. It does affect the flow of air though. You can’t get the air to blow directly into your face is the only problem. If you like that you probably wouldn’t want this. I can still feel the air fine, and that isn’t a problem for me. I can still even feel it on my face and body when I split my air and point it up. So unless you want the air blowing directly into your face, don’t listen to the people saying it blocks the vents. I still haven’t even had to switch my fan speed. For me I like 4-5 and that’s still the way it is. I wanted one when they were $800, but thought that was too much, and now I’m happy with this at $400. Only thing I needed help with after install was the brightness, and asked for help with the brightness and got help fast. Couldn’t believe I didn’t see that I could just switch the brightness to manual in the settings. I also love how I can easily control everything with the buttons on the steering wheel. Music, phone, messages, goggle maps, all the car play apps, and Waze I can even report stuff, all using the buttons on the wheel and not having to touch the screen at all! Really great and smooth, I’ve read in the past about Hansshow coming out with new displays and people updating or even have to replace their pcb boards to stay up to date with the new technology. Which is great if this becomes outdated and that will be a quick and easy fix. So I’m not worried about this display becoming obsolete anytime soon. I’m very happy with it and now will probably always have to install one in my Tesla if I get a new one. Unless I can afford an S or X in the future, and don’t have too install a display in front of me. I also like the look of this more than the S or X, yeah they look more OEM, but this looks more modern and I wouldn’t be surprised if the new S and X dashes look like this display in the future. Since my only complaint is the speedometer which could easily be fixed with an update, I give this display 5-Stars!
Simple, quick installation and does the job perfectly.
Good product, wire harness needs modification
Installation of wire harness for 2022 Ryzen model is a bit of a pain because an additional connection to 12V battery in the frunk is needed. Also the battery harness needs some modification to fit the new Lithium battery in the 2022 model 3. The provided connector doesn't fit. I'd strongly suggest to add an additional fuse in the power wire on this occasion. The installation manual is a joke but that was expected. Other than that I'm pretty impressed with the device. It integrates well with the design and Non-car guys think it's stock. Software is running smooth and stable. I bought the device mainly for Carplay but I find the splitscreen-function actually quite useful especially for having the speedo in direct visibility. I don't use the dashboard screen but it's nice to have.
Customization & Production Center
Hansshow Tech, Tianhe District, Guangzhou, China.
Monday-Sunday 9AM-10PM GMT+8
Warehouse & Distribution Center
14761 Franklin Ave unit E, Tustin, CA 92780, United States
Monday-Friday 9AM-6PM PDT/PST