Compatible Models: Hansshow CCS Combo 1 adapter is compatible with CCS chargers for Tesla Model 3, Model Y, Model S, Model X. Early models(Model 3 2018) need to be confirmed for compatibility. Usually, After 2021 2022 is enabled CCS. ( You can check the system setting at Control>Software>Additional Vehicle Information>CCS adapter support to see if your Tesla is compatible with CCS. )

Fast DC Charging: Hansshow CCS1 adapter for Tesla let you charge at over 5,000 CCS fast chargers nationwide. On average 150kW - 180kW charging rate, allowing you to fully charge within a matter of hours. (Note: Charge rate will also depend on the specifications of the charging station)

Compact&Portable: Add your fast charging options with the Hansshow CCS Combo 1 Adapter which is lightweight and portable, easy to store and use for charging, just pull it out, connect it to the CCS1 charger, and then charge your Tesla.

Quality Assurance: FCC certificate. The exterior of the CCS 1 adapter adopts PC insulation thermoplastic material, and the Conductive contact pin made of copper alloy+silver plating, wear resistance and aging resistance, with the flame retardant grade UL94V-0.

Adapter Performance: Maximum rating with 500V and 300A, Hansshow CCS combo 1 adapter is most efficient at operating temperatures - 20° f to 122° F. Waterproof and anti leakage, protection grade up to IP66.

* Harness Retrofit

A DIY retrofit solution for enabling CCS1 adapter capability on your older Model 3 2018-2021, when using a Gen4 ECU (Note: Need to get the Gen4 ECU from your Tesla Service Center(SC) FIRST.

Please check if the CCS feature is installed in your EV (HOW TO CHECK : CLICK HERE). If it’s “not installed”, then you need this wire retrofits below in order to enable the Tesla CCS1 adapter.
Gen4 ECU : 1537264-00-B Gen4 charge port ECU (Bundle of wires need to be connected in line with Gen4 ECU )

Harness retrofit Installation Video : Click Here

NOTE:
1. Not the Tesla OEM Adapter.
2. Lead time: Ships in Early October

How To Verify Compatibility Of Hansshow CCS 1 Adapter On Your Tesla In The Car Display

Open Additional Vehicle Information under the Software tab of the car settings page and check for "CCS adapter support" info.

Control>Software>Additional Vehicle Informantion> CCS Adapter Support-Check If Enabled

Hansshow -CCS -Combo -1 -Adapter-

Quality Assurance

Exterior of the CCS 1 adapter adopts PC insulation thermoplastic material,

and the conductive contact pin made of copper alloy+silver plating

Flame Retardant Grade UL94V-0

External flame retardant PC+PBT+35GF%
Safety design to prevent accidental direct contact of hands
Life cycle of no-load plug ≤ 10000 times

Language

Country

Language

Country

Hansshow Tesla CCS Combo 1 Adapter For USA DC Fast Charging