Instrument frame only about 3mm; extremely narrow frame appearance display with thin seamless bezel, perfectly into your the dashboard for OEM look; 2.5D screen fits perfectly on the original car dashboard
CarPlay & Android Auto
Support Apple Wireless CarPlay And Wired/Wireless Android Auto
Support Smart Phone Screen Projection
Support Bluetooth, Wi-Fi connection
Support Voice Assistant, such as Siri/Google etc.
Linux System
The hardware of 9.0-inch screen with a powerful CPU with 2GB RAM and 32GB ROM, offers you a faster and smoother experience. It support multiple control method: touch screen, mobile phone, steering wheel, and voice control
Installation Tutorial
Common Troubleshooting Guide
Reason:
The power supply fuse is burnt out
Microprocessor abnormal operation caused by other factors
After unplugged the host connector, it is not plugged in within 5 minutes
The host or screen plug is not plugged tightly
Solution
Replace the fuse of the same model
Restart the key fob
Connect all the wire harnesses, lock the car for 2 hours, keep the mobile phone and remote key more than 20 meters away from the car, and check whether the screen can be setup after 2 hours
Reconnect the host plug
Reason
Screen data error
Solution
Press the RST reset button on the right side of the screen to restart the system
Reason:
Navigation software is uninstalled or deleted
Solution:
Re install the navigation software
Reason
WIFI is not connected or there is no 4G network
Solution
Connect WIFI to synchronize online map or check whether there is 4G signal
Reason
GPS antenna position interferes
Solution
Relocate the position
Reason
The protocol wire of the power wire is not connected
Solution
Reconnect the wire and check the wire interface
Reason
Carplay did not connect in the correct way or the screen software version is outdated
Solution
Reconnect Bluetooth or upgrade APP; Contact aftersale service or download the upgrade software from the website
Reason
The system signal is not synchronized
Solution
Unplug the power cable and reconnect
Reason
Signal jamming
Solution
1. Set the default call path to the original vehicle Bluetooth or external speakers.
2. When using carplay, if you want to route calls through the car or speakers by default, you need to go to iPhone Settings>Accessibility>Touch>Call Audio Routing>Set as Bluetooth headset, and then default to any Bluetooth device. In this case, Tesla is selected.
Reason
Incorrect setting
Solution
Check whether auto is selected in the setting instead of speaker
Customer Reviews
4.8Based on 89 Reviews
5 ★
82%
73
4 ★
16%
14
3 ★
1%
1
2 ★
0%
0
1 ★
1%
1
Customer Photos
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
i
Write a ReviewAsk a Question
Reviews
Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!
Model Y (Intel Atom) / Left Hand Drive / LHD / New OTA Version
JM
Jermaine M.
Canada
03/22/2023
I recommend this product
Great product, wish it had more integration
The installation is easy and the product feels OEM. Quality is great, controlling it is easy. The true highlight is apple CarPlay integration. However, the stock UI that mirrors speed limit and certain signals that come built in with the unit are really boring, and I wish it had more integration with the car. Is it possible for the blind spot camera to show up on the display like it does on the main screen when changing lanes? The stock Tesla image on the basic home screen is also extremely low quality. The screen could use some updated themes, images, and features. For now Apple CarPlay is how I use the screen, but I would like to be able to use the built in UI as well.